High-Brightness 2835 Cuttable Constant Current LED Strip

By Shirley Huang | Updated: Nov 19, 2026

Does the strip go dim at the far end on long runs? Is the cutting interval too long, making it hard to fit the size on site?

In applications like ceiling coves, long corridors, hotel lobbies and commercial display spaces, strip lights often have to be laid continuously over long distances. Ordinary strips can show uneven brightness from one end to the other, and limited cutting positions make installation and offcut handling more of a hassle.

Constant current LED strip in luxury villa ceiling cove lighting

This constant current LED tape uses a constant current IC to help improve brightness uniformity over long runs. Its cut-at-every-LED design makes these cuttable strip lights easy to trim at the marked positions to fit different installation lengths, so there’s less adjusting on site.

What Is a Cut-Anywhere Constant Current LED Strip?

This constant current LED tape features a wire-free, double-sided plated PCB with an integrated constant current IC, and it supports long-distance applications, whether as an LED strip 10 m in length, as 20 meter LED strip lights, or at 30 m and beyond. The constant current design helps keep the current stable along the run and reduces the brightness drop caused by long-distance power supply. As long as the power supply meets the product requirements, power can be fed in from just one end.

These cuttable strip lights use a cut-at-every-LED design, so you can cut along the marks at single-LED intervals and match different installation lengths. Cutting is simple, which makes on-site installation and custom sizing easier, for both long continuous runs and small local adjustments.

Product Features

Long-Distance Constant Current Design

This constant current LED strip uses a constant current IC to keep the operating current stable. It suits long, continuous runs and helps fix the dimming at the far end that traditional strips suffer from. With less mid-run power injection and fewer extra connections needed, installation is simpler.

Cut at Every LED, Flexible Cutting

Standard constant current strips usually share one IC across every 6/8/10/12 LEDs, so they can only be cut at fixed points and the length isn’t very flexible. With the cut-at-every-LED design, these cuttable strip lights can be cut along the marked positions at single-LED intervals. That makes it easy to adjust the length to the site, with fewer cutting limits and less wasted material.

Cuttable strip lights comparison showing single-LED cutting marks

High Efficacy, Bright and Energy-Saving

Measured efficacy reaches 150 lm/W, so you get plenty of light output at lower power consumption, and spaces stay bright and clear. Whether it’s used in ceiling coves, cabinet lighting, display cases or linear lighting in commercial spaces, it balances lighting performance with energy use for more efficient everyday lighting.

Constant current LED tape test report showing measured efficacy

Faster, Easier Installation

With ordinary resistor-based strips, long runs usually need extra power feed points or additional wiring, which makes installation fiddly. This constant current LED tape supports long-distance runs and can be cut at the marks, so there’s less wiring and sizing work on site, which helps save installation time and cost.

Constant current LED strip for continuous hotel corridor cove lighting
24V RGB/RGBW individual pixel Led Strip
From stage shows to hotel decor, our 24V pixel LED strip is an individually addressed LED strip with RGB/RGBW options and cut-by-LED flexibility for your project.
WS2805 RGBCW Addressable LED Strip
Learn about the WS2805 RGBCW LED strip, its five-channel control, working principle, controller compatibility, wiring, installation and troubleshooting.
LED Sign Lighting: How to Achieve Bright, Uniform and Reliable Signs
Choose LED sign lighting for channel letters, light boxes and neon signs. Explore neon rope light, mini cutting options and practical installation tips.

Recommended News