WS2805 RGBCW Addressable LED Strip
By Kimi Liu | Updated: Nov 11, 2026
This article explains the construction, control method and key selection and installation points of a WS2805 RGBCW LED strip, using LEDWorker's standard model LW-D0158 as an example.
What Is a WS2805 RGBCW LED Strip?
A WS2805 RGBCW LED strip is an addressable LED strip driven by WS2805 digital ICs. It combines RGB colour lighting with warm white (WW) and cool white (CW), allowing it to produce dynamic colour effects as well as adjustable white colour temperatures.
RGBCW refers to the five lighting channels: red, green, blue, warm white and cool white. WS2805 is the driver IC that receives digital signals and controls the LEDs. In our standard model, each IC controls 6 LEDs, so the strip is addressed in groups of 6 LEDs rather than LED by LED.



Main Product Specifications
| Parameter | Specification |
|---|---|
| Model | LW-D0158 |
| Driver IC | WS2805 |
| Input voltage | DC24V |
| LED type | SMD5050 RGBCW |
| LEDs per metre | 60 LEDs/m |
| ICs per metre | 10 ICs/m |
| LEDs per IC | 6 LEDs |
| PCB width | 10mm |
| Rated power | 18W/m |
| Minimum cutting length | 100mm |
| Control method | SPI |
| PCB connection | 4PIN |
Please note that 4PIN describes the PCB connection interface; it does not mean that the WS2805 has only four control channels. The WS2805 IC has five output channels for RGB, warm white and cool white. Always follow the markings on the actual PCB and the supplied wiring diagram when connecting the strip.
How Does a WS2805 RGBCW LED Strip Work?
The WS2805 strip is controlled by digital data. The controller generates data according to the selected colour, brightness or lighting effect, and sends it to the ICs through the DATA line.
Step 1: The controller sends data
The controller sends the required colour and brightness information for each LED group to the first IC.
Step 2: The IC decodes the data
Each WS2805 IC extracts its own 40-bit data packet, consisting of five 8-bit channels for R, G, B, W1 and W2. Each channel supports 256 grayscale levels.
Step 3: The IC controls the LED output
The IC controls the colour and brightness of its LED group according to the data received. Adjusting the RGB, warm white and cool white channels creates colour effects and adjusts white colour temperature.
Step 4:Data passes to the next IC
After extracting its own data, each IC reshapes the remaining signal and passes it to the next IC, forming a cascaded control system.
As the controller continues to send updated data, the strip can create effects such as chasing, fading, flowing and rainbow patterns. Please note that each IC in our standard model controls 6 LEDs, making 6 LEDs the minimum control group.
Key Features to Know
Five-channel RGBCW control:
the RGB channels create colour effects, while the warm white and cool white channels can be adjusted independently. This is useful for projects that require both colour lighting and adjustable white light.




Grouped addressing:
each IC controls 6 LEDs, allowing the controller to change the colour and brightness of each group. When selecting the strip, check that this 6-LED control group meets the project's requirements.
Dual DIN / BIN data inputs: the WS2805 IC provides DIN and BIN data inputs, with BIN serving as an auxiliary data input. The actual backup behaviour depends on the PCB design and wiring. It should not be assumed that all downstream LEDs will continue working after any IC failure.

Recommended News